Step 6: Restringing

The strings I usually use have the "nuts" on the end, so instead of drilling new holes for the strings I threaded the pair through the end of the other one.(Have a look at the photos). To adjust the width between the strings I put in small screws between the pair, the theory being that the futher the screw is in the wider the strings are. This limits any buzz between the strings and on the saddle
What is the sound like from it?<br>Is it worth making?
Well ....not really,<br>it was more of an experiment, it didn't help that the strings are really thick, it was 3/4 size guitar aswell. <br>It's a bit of fun.
<p>I want to try this on a cheap electric, seems like it could be more feasible.</p>
I would think your neck (a classical to begin with, thus built for nylon strings) would suffer the extra tension. I'd worry about the bridge too, but it's hard to tell from your photo how you actually anchored them.<br><br>I went the other way, taking the 'extra' strings off my old Epiphone 12-string because I have big hands and feel like my LH fingers are always too fat. I thought why not experiment with a wide neck in this way instead of buying a new guitar. Granted I still need to put new strings on - they're old and a bit too light anyway. But so far I'm very pleased. I worried that the unused tuners would rattle (in which case I'd run a string though them all and add a little tension) but they're stiff so no problem yet.<br>
Yeah I'd agree with nylon strings, I think 12 strings are much nicer as nylon, I found the neck was way too overcrowded.<br><br>I like what you did.

About This Instructable




Bio: Why do I always find myself making things when I should be doing work???
More by mattyuke:How to make a ukulele, banjolele, banjo ukulele, guitar stand. How to make/convert a 6 string guitar to a 12 string guitar How to fit a Universal Joint(UV/UJ) Land Rover or 4x4 
Add instructable to: