How to mod a nerf dart to fire in your Longshot CS-6.

This is my first instructable and a extremely easy one.
One day i got tired of checking if walmart had any "streamline" darts for my longshot, every time i go they say theres none in stock or they dont carry them any more, so i decided to make my own.

Materials
-Nerf Longshot CS-6
-Nerf darts
-Scissors

Step 1: Cutting the dart tip

This part is easy just cut off a piece of the tip of the dart. Then just cut around the tip until there is mostly just the flat tip left (it should look like pic 2).

Comments

[Samuraikidd]

Rip the head off and proceed to fill top part with hot glue. Keep turning the dart so the hot glue dosent drip all the way down the center.

[jmenard1]

keep at it buddy but this didnt work did i miss a step?

[gman423]

hey i like the idea it was very neat the first one i made it was bad but the second on ewas perfect and i under stand the walmart thing they never have it there and it is annoying thank you for the idea i needed nerf bullets

[mebuildgunz]

dud thx i hav a old long shot cs-6 it cudnt shoot more than 5 ft now it shoots more than 27 ft acuritly i dnt even gloo the fome stuff on the spring dosnt mater thanks

[JamesTB13]

Those are just paramedic scissors.......also, I agree with the guy below me, just buy some streamline darts.

[A stranger]

U would think that buyin stream line bullets would be so much faster

[dman449]

this doesnt work at all

[mr.guy]

ahhhhhhh i see what ur doing ur cutting off the top so that the barrel will allow the bullet to pass through hmmmmmmm smart idea. i had destroyed some of my magstike darts trying to shoot it without the mod. thx for answering my concern

[Bobcorncob]

Is there supposed to be a hole in the top when you cut off the Velcro part on a tagger dart?

[Bobcorncob]

And if it does, will that affect the range?

[xSaeftx]

No, the hole is glued up when you take the cap off. "Ill Advised" is right though, these micro darts do shoot farther. But i still like stephans the best.

[chunhon348]

I think this is too light, I think adding BBs will help

[mailman575]

so you just cut the orange peice off? and thats it? i think you should put a bb in there.

[maxmaz2]

with those quarter cutting scissors my friend cut a cellphone in half

[cmd1237]

you would think they would go shorter

[CapnTac]

This will work with a Recon CS-6 too, right?

[dsman195276]

kinda, mine used to jam. take the air restrictor out and the little peg that sticks out and you will be fine.

[Blister]

These really work. Thx

[maxxxem]

you can also stick on an air restrictor from a gun to improve the distance, yes an air restrictor. 3*

[dakkenly]

About yesterday I got like 6 of the velcro ones and did that, then saw this and said "wow that looks alot like most of my darts!" They shoot like a dream, but with a lot of fishtailing if you can't weight it with BBs correctly.