Instructables

How to mod a nerf dart to fire in your Longshot CS-6.

Step 1: Cutting the dart tip

This part is easy just cut off a piece of the tip of the dart. Then just cut around the tip until there is mostly just the flat tip left (it should look like pic 2).

Step 2: Getting rid of the dart tips edge

Picture of Getting rid of the dart tips edge
108_0704.JPG
Now cut the edge of the tip a little, just cut dont to deep or the top flat piece(pic 1)!
Then rip off the edge slowly, dont rip the Styrofoam(pic 2).

Step 3: Your done!

After step 2 it should look like the pic. It should also fire. For some reason these flat tipped darts fly further than my last remaining dart I have that came with the gun.
Samuraikidd2 years ago
Rip the head off and proceed to fill top part with hot glue. Keep turning the dart so the hot glue dosent drip all the way down the center.
jmenard12 years ago
keep at it buddy but this didnt work did i miss a step?
gman4232 years ago
hey i like the idea it was very neat the first one i made it was bad but the second on ewas perfect and i under stand the walmart thing they never have it there and it is annoying thank you for the idea i needed nerf bullets
mebuildgunz3 years ago
dud thx i hav a old long shot cs-6 it cudnt shoot more than 5 ft now it shoots more than 27 ft acuritly i dnt even gloo the fome stuff on the spring dosnt mater thanks
JamesTB133 years ago
Those are just paramedic scissors.......also, I agree with the guy below me, just buy some streamline darts.
A stranger3 years ago
U would think that buyin stream line bullets would be so much faster
dman4494 years ago
this doesnt work at all
mr.guy5 years ago
ahhhhhhh i see what ur doing ur cutting off the top so that the barrel will allow the bullet to pass through hmmmmmmm smart idea. i had destroyed some of my magstike darts trying to shoot it without the mod. thx for answering my concern
Bobcorncob5 years ago
Is there supposed to be a hole in the top when you cut off the Velcro part on a tagger dart?
And if it does, will that affect the range?
No, the hole is glued up when you take the cap off. "Ill Advised" is right though, these micro darts do shoot farther. But i still like stephans the best.
chunhon3485 years ago
I think this is too light, I think adding BBs will help
mailman5755 years ago
so you just cut the orange peice off? and thats it? i think you should put a bb in there.
maxmaz25 years ago
with those quarter cutting scissors my friend cut a cellphone in half
cmd12375 years ago
you would think they would go shorter
CapnTac5 years ago
This will work with a Recon CS-6 too, right?
kinda, mine used to jam. take the air restrictor out and the little peg that sticks out and you will be fine.
Blister6 years ago
These really work. Thx
maxxxem Blister5 years ago
you can also stick on an air restrictor from a gun to improve the distance, yes an air restrictor. 3*
dakkenly6 years ago
About yesterday I got like 6 of the velcro ones and did that, then saw this and said "wow that looks alot like most of my darts!" They shoot like a dream, but with a lot of fishtailing if you can't weight it with BBs correctly.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!