Print PDF
Favorite
Email
Step 11Placing the dvd and hard drive in.
You will need a glue gun for temp fit.
• The hard drive will go in first almost resting
on motherboard , ide cable will run under it.
• The dvd drive will have a slight downward
angle it will rest on the hest sink barley
touches. Try to do a test fit you may have to
grind a little to get it flat against the bottom.
• The hard drive will go in first almost resting
on motherboard , ide cable will run under it.
• The dvd drive will have a slight downward
angle it will rest on the hest sink barley
touches. Try to do a test fit you may have to
grind a little to get it flat against the bottom.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
