Introduction: How to Modify a Nerf Dart Tag Gun

It is very easy.
It makes it go alot faster and farther
plz comment

Step 1: Taking It Apart

to take apart the nerf gun you must first take out all of the screws. then pull the top part off.

Step 2: Second Step

Do not touch the trigger or anthing but what I tell you or else it might not work.

Step 3: Modifying

take out the turret part and open it carefully. Then take out the forks and sticks that will make it go alot faster.

Step 4: Finished

Tell me how it worked.

Comments

author
elliot5445 made it! (author)2014-04-07

I did this mod already, but when I did it I put the spring from the firefly rev-8 in it. It stings!

P.S. the rev-8 is a horrible gun.

author
maxomega made it! (author)2011-09-09

Me as Soviet Russian: My gun screwed me! If my gun is broken i will have to kill with my breath!
Seriously, my gun wont spin revolve! It wont fire either!

author
Croeser002 made it! (author)2010-11-20

Umm the big black cylinder thing fell out when i opened it and fell into many pieces, i need help

author
charizard101 made it! (author)2010-11-11

the forks are the things that go inside the hole in the dart so when you stick the dart in it is stabilized and harder for the dart to fall out so after modding,don't hold it down

author
An Villain made it! (author)2010-04-09

gun got screwed.

author
will421 made it! (author)will4212010-10-03

In soviet russia, Gun screw you!

author
An Villain made it! (author)An Villain2010-10-04

EES NOT POSSIBLE!

author
lilrou15 made it! (author)2009-04-05

it"s soooooooooo hard

author
irule29 made it! (author)irule292010-01-30

thats what she said

author
mr. cool 384 made it! (author)2009-09-18

please explane more i dont want to break my gun wat are the forks u are refering to

author
Nick c made it! (author)2009-07-10

It Works a little better. But not much of a difference.

author
ripstik juggler made it! (author)2009-07-07

I've screwed my gun up 2. there's a spring near the trigger thats not attached to anything and if I pull the trigger it doesn't go back into the original position, it just sits there. could you please tell me what to attach the the spring to?

author
timt97 made it! (author)2009-07-01

I've totally screwed my gun up, the reload thing wont click, the barrel rotates easily, and I've got 2 springs out.... Please help me! Could you get a big picture of the interior of red, so I can see where things go?

author
crapcooker made it! (author)2009-04-28

screw you nice job its a funny joke cause da screws

author
emuostrich made it! (author)2009-04-22

Removing the air restrictors (the "forks and sticks") won't speed anything up. Also, if you have the time to think about "forks and sticks", you have the time to join my site at http://www.theinnercore.webs.com. And join NOW or you won't get the valuable incentive.....

author
luigiman964 made it! (author)2009-04-11

how much further does this make them shoot

author
ianaf made it! (author)2009-04-06

The barrel of the gun won't rotate now, what should I do to fix that. Help

author
irule29 made it! (author)irule292009-04-07

sometimes if you screw in the screws to tight it wont rotae just loosen the outside screws

author
emuostrich made it! (author)2009-01-20

"Forks and sticks?!!?!?!?!?!?!??" Well, the "forks and sticks" are the air restrictors......ehehehe you crack me up.... ROAFLMAO!!!

author
Epeoples made it! (author)2009-01-14

what did i do wrong? it doesn't shoot.

author
bounty1012 made it! (author)2009-01-01

Ive got a simple mod, To make the gun shoot farther, take a few rubber bands around the thing you cock the gun with and put the other end around the front handle.

author
leemansport made it! (author)2008-10-30

kewl...

author
Epeoples made it! (author)Epeoples2008-11-27

so your saying the forks have the 3 prongs and the sticks are the long things with bases? take those out? okay...

About This Instructable

18,859views

4favorites

License:

More by irule29:How to modify a nerf dart tag gun
Add instructable to: