Instructables
Picture of How to mount a shelf with wood shelf brackets
Everyone needs a single shelf somewhere in their home.  I will show you how to mount a shelf measuring 3/4" X 10" X 36".  To support the shelf, I'm using two cherry concave 8 shelf brackets from Tyler Morris Woodworking.  One shelf bracket is mounted to a wooden stud and the other is attached to drywall only using Toggler drywall anchors.

I'm aware that the shelf brackets have a 250 lb. capacity rating and the Toggler brand drywall anchors have a 200 lb. capacity rating.  I plan on using my shelf for books and small objects. It's safe to assume that this load  will not cause my shelf to fail.

Step 1: Tools and Materials

Picture of Tools and Materials
I'm the owner of TylerMorrisWoodworking.com and I'm using two of our Cherry Concave 8 shelf brackets and a 3/4" X 10" X 36" shelf.  The simple tools required to install your shelf are the following; 4' level, 9" level, hammer or mallet, drill, drill bits, masking tape, pencil, screwdriver and a stud finder.  You will also need hardware for mounting the shelf to wooden studs and to drywall only.  This includes #10 x 2 1/2" flat head wood screws, 10-24 X 2" flat head machine screws, #8 X 1 1/4" flat head wood screws and Toggler brand drywall anchors.  You will also require 7/16" button head wood plugs. 

Step 2: Layout and Planning Part 1

Picture of Layout and Planning Part 1
My plan is to mount the shelf about 6" to the right of some existing molding and...

Step 3: Layout and Planning Part 2

Picture of Layout and Planning Part 2
...about 66" off the floor.

Step 4: Layout and Planning Part 3

Picture of Layout and Planning Part 3
Then I use my 4' level to create a level line from my 66" mark.

Step 5: Planning and Layout Part 4

Picture of Planning and Layout Part 4

I place a mark along my level line to represent the end of my shelf.  In my case, at 36".

 
Remove these adsRemove these ads by Signing Up
tmorris28 (author) 4 years ago
Thanks folks.  Instructables is new to me.  I have spent the past two evenings immersed in it. 
I had fun writing this tutorial and I have a list of other wood related projects that I would like to share too.

Thanks! This is awesome! Lots of clever ideas I hadn't seen before here (e.g. the masking tape on the 3/32" drill bit to keep it from poking through). And nice shelf brackets, too.


It appears that the shelf sits back about 3/4" from the wall, since the vertical member of the shelf bracket prevents the shelf from being flush with the wall. Have you found that to be an annoying feature, or is it fine the way it is? I imagine smaller items might fall through.

Were anyone deterred by that aspect of the design, I suppose it wouldn't be too hard to put 3/4"x2"(?) rabbet joints on the ends of your shelf so it fits snuggly in between the vertical members of the shelf bracket.

tmorris28 (author)  Gspevak117 months ago

Hi and thanks for the compliment and feedback. Yes, with this design the shelf will remain the 3/4" from the wall, but one can "notch" the shelf to make it sit flush with the wall. Also, fyi, we make a bracket that the shelf sits on top, therefore allowing the shelf to install flush to the wall. -Tyler

http://www.tylermorriswoodworking.com/corbels/

Corbels for granite countertops.jpg
manishrkp1 year ago
Nice instructable, is it ready made shelf or you have build it?
Nice guide! Thanks for sharing it with us. You could use redi-drivers in place of the toggles.
owl box4 years ago
I appreciate that you took the time to put together a tutorial, that novice "handymen" will find useful.  People that arrive at Instructables looking for general advice may be intimidated, unless someone provides these kinds of "basic how-to" articles.
lemonie4 years ago
That's very good, you show everything very clearly.

L