Instructables

How to open an XBOX 360 controller without a special screwdriver.

Step 4: FINISHED!

You dont have to modify the screws, screwdriver, or go scearching for a custom screwdriver. helpful. 

anarchia6663 years ago
Very thanks for tip man! It's working very well :)
sdally3 years ago
If you have pushed down the center button in the screw use a 5/64 Allen key and you should be able to get the screw out you may even be able to use the Allen key even if the screw is not pushed down I just did this yesterday so I know it works.
kwest23 years ago
ya but what happens when the little thing sticking out of the screw in the middle brakes should i use a T8H screwdriver?
1337pino kwest23 years ago
I had a couple of mine break. I then switched to a 2.4mm flathead. If you can get it lined up with the middle, and you keep at it, it will come out.
melanton4 years ago
It's a good read, use this method at your own risk.

My bit snapped on the fourth screw. Thank you Lifetime guarantee....

I'm going to replace it and buy that special one.
tyeo0985 years ago
ಠ_ಠ
Torx T8 was 2.99USD on ebay, shipped.

But im always a fan of using the flathead to open stars.
Thats how I open HDD's!
LOL you actually use a screw driver to open hard drives, I take a powerdrill and drill through the screws.
Works great!
BuffaloNickel (author)  tyeo0985 years ago
this is more so you dont have to go and buy one, you can use a driver you already have. (hopefully)
lemonie5 years ago
You should edit the tags to include references to T8H screws, as this doesn't just apply to XBOX 360 controllers it's got wider usefulness.

L