Introduction: How to Origami a ROCKET
I wonder when it will be our time to ride?
Step 1: White Side Up
White side up, fold in half diagonally both ways and unfold.
Step 2: Fold Top and Bottom Points
Fold top and bottom points to the center.
Bring right corner to the center and pinch along edge to make small crease mark.
Matching circle points, fold left corner to touch crease mark.
Fold upper layer corner back to the left to make white triangle.
Step 3: Fold Top and Bottom Folded Edges
Fold top and bottom folded edges to meet at the center.
Step 4: Fold Inner Corners Out
Fold inner corners out white squash folding paper evenly.
Step 5: Fold Upper Raw Edge
Fold upper raw edge to the folded edge.
Mountain fold top half down behind.
Step 6: Lift Corner
Lift corner and swivel swivel paper up.
Inside-revers fold corner down.
Step 7: Inside-reverse Fold
Inside-reverse fold top corner down into model.
Inside-reverse fold bottom corner in. Repeat behind.
Valley fold lower flap up as shown. Repeat behind.
Step 8: Lower Folded Flaps
Lower folded flaps into position. Repeat behind.
Step 9: Open Up
Open up from the bottom.
Insert top inner layer into bottom pocket.
Step 10: Draw Windows
Step 11: Fix With Double Sided Tape
Fix with double sided tape the nose of the rocket.
Step 12: Model Complete!!
Model becomes 3D.
Please subscribe to my channel!!