Spray paint space scenes are fun and with a little bit of practice, you can make paintings to amaze all your friends and family.
Okay, so lets learn how to paint amazing space scenes, like the one below!
You will need:
-Poster paper (must have a glossy side!)
-Spray paint (the more colors the better)(oh, and glossy paint works the best)
-Rubber gloves (optional)
-magazine or newspaper pages
Step 1: Chose your colors, then spray them.
Pick two colors for each planet/moon (my colors are yellow and red for my planet and blue and pink for my moon).
Spray the colors on top of one another in the general area you want the planet and moon. It's okay to spray larger areas than you need, in fact it's good to do to insure there is no white showing through on the edges of your soon-to-be planets.
Generally speaking it's best to spray the lightest color first, then the darker one, but you can do it either way.
Step 2: Making the pattern
Then pull the pages off after a couple of seconds to reveal the pattern it created.
Using black (or what ever color you want the sky to be) spray a curved line on one side of each soon-to-be planet; this will be the dark side of the planet, so make it the same direction on all of them so they have a common light source such as a near by star.
Step 3: Making the sky
This is where the circular objects come in. They need to be things that you can get spray paint all over. I went to a second hand store and bought some old pot lids, I also use the spray paint caps a lot, and pennies if I need really tinny moons.
Next, with the lids firmly in place, paint the whole paper black (or what ever color you want the sky). Make sure you get all around the lids, sometimes they block areas, and if you don't get it all it makes your planet look funny.
It's good to do this with a large piece of scrap paper behind your painting, or you will get it all over the surface behind your painting; like I did on the upper left corner (I forgot about that and need to clean that up tomorrow...)
Step 4: Making stars
I find that Rustoleum glossy white paint works the best for stars, but that's just my preference. All you need to do is aim the paint can upwards and press the nozzle just enough for some paint to come out. (obviously arm it away from your face, but don't point it directly at your painting). Short bursts work best to control the amount and general whereabouts of the stars.
You can also spray a little bit on your finger and flick it at your painting to make stars, but you must have gloves on for that, it's REALLY messy.
Make your stars any color you want. I usually have white, yellow, and sometimes red stars in my paintings.
Also you can add space dust behind your planets; just spray a line of color across diagnally, as seen in the second picture.
Step 5: Reveal your planets
And you're done!
Using variations of this technique you can make original, semi-easy works of art! You can add mountains obscuring your view, close up stars, alien cities, different kinds of planets like gas giants, the sky is the limit!!
The next pictures are some examples of ones that I have done: