With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I'm going to show you how to paint some cover for airsoft. I did this earlier today. Sorry for the pictures... I forgot to take pictures so they're in...
I use wood. Cut it to what you want it to look like or just leave it. You can use wood(pallets, plywood, logs,), plastic, some metal, tarp, tires, ca...
Clean your project of grime and dirt so that the paint will stick.
Get about 3 or 4 ferns. You can use leaves or sticks but I used ferns because I think they look cooler. :P You can get ferns, sticks, leaves or make ...
This is kind hard but it prevents your decal from looking blurry. Notice in the picture below that the spine of the fern is curved. Kind of snap the s...
For this step pick 2 colors, one primary and one secondary. My secondary was green and my primary was brown. You can make it white and black or tan an...
Lay out the ferns or sticks or leaves over your project how ever you want them to be.
Now paint you primary color. Try to paint directly over you project about 10 inches high so that you don"t blow away the ferns or leaves with the pain...
Just let it dry and nail it up to a tree or something. :D Comments are appreciated.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »