Step 7: Preparing the new batteries
when your new batteries arrive, flux and tin both ends with solder
use a small iron with a nice large flat head
do not hold the iron on the battery for more than a second or two
wait
try it again until the solder melts and adheres to the battery
wear eye protection and use common sense
common sense says "overheat . . . and BOOM!"
take your time tinning the ends
one or two seconds at a time
flux is a must!!
use a small iron with a nice large flat head
do not hold the iron on the battery for more than a second or two
wait
try it again until the solder melts and adheres to the battery
wear eye protection and use common sense
common sense says "overheat . . . and BOOM!"
take your time tinning the ends
one or two seconds at a time
flux is a must!!
Remove these ads by
Signing Up
Visit Our Store »
Go Pro Today »
Like a 100W trigger gun.