How to recover an old bicycle seat

Step 7 Second Spray

Again, in a well ventilated area, prepare for spraying again. This time around, place the seat face down with the unattached material splayed out.

Cover the rails (metal bars) so no excessive spray ends up on the bottom of the seat. I used a plastic bag, but masking tape or newspaper would work as well.

Gently and lightly spray the fabric/vinyl material, again following instructions and allowing time to dry between the two coats.

Comments

[kouros IV]

this by far, is my favorite project here on Instructables. If only I hadn't thrown away previous tattered bike seats :(

[Csebastian9]

wow