Print PDF
Favorite
Email
Step 10Stain drum
This is practically a repeat of step 6, but let us review anyway.
Remask any portions that need to be redone. Make sure the masking of the hardware holes is still satisfactory before you apply the stain.
This time around, I put on 2 coats of the green stain, following the directions of the product for drying time between coats.
After the having to sand it down, it did make the grain of the wood show up better this time, so there was some good in my mistake.
Now, let's try and do the clear coat right this time!
Remask any portions that need to be redone. Make sure the masking of the hardware holes is still satisfactory before you apply the stain.
This time around, I put on 2 coats of the green stain, following the directions of the product for drying time between coats.
After the having to sand it down, it did make the grain of the wood show up better this time, so there was some good in my mistake.
Now, let's try and do the clear coat right this time!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
