Step 3: Join Threader to New Cord
You now need to join the threader to the new cord.
This is done by a butt joint of the threader and cord together and then securing with a very small amount of sticky tape. I used one revolution of sticky tape here in the photo.
Do not use a lot of tape as this will add drag to the threader and make it stick to inside wall of the tent pole.
This is done by a butt joint of the threader and cord together and then securing with a very small amount of sticky tape. I used one revolution of sticky tape here in the photo.
Do not use a lot of tape as this will add drag to the threader and make it stick to inside wall of the tent pole.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
