Print PDF
Favorite
Email
Step 6
After all connection was finished, fit the battery at the battery box, replace it at place such as before you take the old battery out. Please make sure all connections is good and no any short circuit. Used electrical tape to secure any opened connections with possibly make any short circuit. Double checked the connections before you close the battery cover. Used Multimeter to see the voltage and make sure the + and - is not wrong placed.
If finished, drop glue for plastic to fasten the battery cover. Leave it few minutes until the glue is dry. Make the first charging at least 8 hours with handset is off. After 8 Hours, battery will full charge and you can enjoy talk with your Transceiver handset with strong power. Good luck.
If finished, drop glue for plastic to fasten the battery cover. Leave it few minutes until the glue is dry. Make the first charging at least 8 hours with handset is off. After 8 Hours, battery will full charge and you can enjoy talk with your Transceiver handset with strong power. Good luck.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
