Print PDF
Favorite
Email
Step 9Getting to the white socket on the board to unplug battery
We struggled to get to the socket on the board so decided to go in via the top.
There are SIX screws and two circuit boards. You must first remove the round chipset or circuit board at the top which is secured by two screws at the 12 oclock and the 6oclock position.
One this disc is removed then you can get to the edge screws on the bottom circuit boards.
There are SIX screws and two circuit boards. You must first remove the round chipset or circuit board at the top which is secured by two screws at the 12 oclock and the 6oclock position.
One this disc is removed then you can get to the edge screws on the bottom circuit boards.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
