Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
The largest of the three common tie knots. It's symmetrical and has a commanding presence. It works well with narrow or thin ties and wide collars. ...
Lift your collar and place the tie around your neck with the front side facing out. The wider end of the tie should be on your right. You'll probably ...
Grab the wide end of the tie and cross it over the narrow tail.
Loop the wide end around the left branch of the Y at the top of the knot by putting it through the center of the Y. Make it hang to your left when you...
Bring the wide end around behind the knot.
Now loop around the other (right) arm of the Y, like we did in the Half Windsor Loop step.
Loop the wide end around the front of the knot.
Bring the wide end of the tie through the Y at the top of the back of the knot and also through the loop you just formed.
Tighten the knot by grabbing the tail and holding under the knot while you pull down on the wide end. Then bring the knot up to the collar by pulling...
Flip down your collar and adjust the placement of the knot.
The Full Windsor is a substantial knot. It is pleasingly symmetrical, forms a distinct triangle, and fills out a wide collar nicely. It may be too big...
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »