With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
I made wedding bands for my brother and sister (in law) on the lathe at TechShop Detroit! I made them out of brass because it's cheap and easy to turn...
Tools: - Cutting tools with interchangeable carbide cutting points - Center drills for the lathe - Drill bits (larger than 1/2" - I chose one the siz...
Chuck your round stock into the 3-jaw chuck. If you can, plan to make the ring all in one go - then you don't have to worry about re-centering your pi...
Just like we "dressed" the butt end of the material, we have to make the outer surface of the material even before we start to measure cut depth into ...
The next steps will be shaping, finishing, and parting the ring from the stock.
Tag files as:
Lathe safety switch. I made it at TechShop-Detroitby AirCastle
Aluminum Captive Ring on Barby Nikkio101
How to Make a Sanding Stickby Jason von Techshop
CNC mill project. I made it at TechShop-Detroitby AirCastle
Making of a segmented vase - I made it at TechShopby rpare
Honey Dipper on a Wood Latheby adamwatters
How to Cut Sandpaperby Jason von Techshop
Ringmaster Lathe Ring Alignment Toolby CWKr
Halloween attraction (tech shop)by daveclark5
Rubber Powered Power Boat "I made it at TechShop"by misailor28
Download our new apps for iOS and android!
©Copyright 2013 Autodesk Inc. All rights reserved.
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.