With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
In this instructable I will show you how to turn an X-Box 360 PSU into a high ampere 12v power supply. This is simple and it only requires a few part...
You will need a few basic things for this project... 1. An X-Box 360 PSU (power brick) 2. Heatshrink 3. A small length of Red and Black with able to ...
Strip the main insulation taking care not to cut the cores' insulation. After that, You will come across 8 wires. 3 black, 3 yellow, a blue and a red....
Strip all the yellow wires and twist them together. Tin the conductor after that with solder. Now take on end of the thick red bit of the cable and p...
Now repeat the procedure with the ground and black wire. Heatshrink it.
Put the big bit of heatshrink over and shrink it. Make sure the red and blue wire are in there. I used a short piece because it was the only bit I ha...
Now it's time to put on the aligator clamps. Strip the other ends of the thick wire and tin both negative and positive. Then put the clamps on making...
All finished. Plug it in and try it out. Now you have got your own high power 12v supply! Have fun and enjoy! Don't forget to rate and comment!
Remove these ads by
Signing Up
Not NiceInappropriateSpam7,456 views
11 favorites
Posted:
Apr 18, 2011
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »