Today i will show you how to use a windows Vista laptop as a wireless adapter for a xbox 360.I'm not sure if it will work with windows xp or windows 7 but it might.
Remove these ads by
Signing UpStep 1: What you need
A xbox 360
A vista laptop that has internet connection
A ethernet cable






































Visit Our Store »
Go Pro Today »




Please tell me what to do.
thanks
i've gone through about 12 -15 (wasn't really counting) xbox's since i bought my 1st console 2nd hand a few of them stopped working for other reasons but l went through the most of them when i shared my laptops internet connection through xp.
I connected in this way for approximatly 3-4 months when i was connected in this way i went through around 8 -10 most of which had the same error i can't remember the exact code but console displayed 3 red lights and error message i asked guy at the store were a kept returning my consoles and he said the error was to do with hardware failure on the ethernet port.
I kept getting newer consoles which also broke the one i have now is one that i had previously returned but having been repaired shortly after recieving this console i stopped connecting through my laptop and i've had this one for at least without and problems.
I would risk this if you don't have a guarantee on your xbox i was lucky that with store i bought my console from i could just go a swap it for another there and then with out having to send it off.
I'm using the connection it works. BUT everytime I play, the server times like every two minutes. Does anyone know how to fix this? or what would cause this? Because the connection is always excellent or very good. HELP PLEASE!!!
I have a question if it says an error occured while the network was enabling what exactly does that mean and what can i do about it so i can hook up my xbox to my laptop. Thanks Nate
Also if you have a desktop computer then for some reason the connection is on the xbox is better than a laptops connection.
Recently formatted my laptop.. now when i try to click the share box i get an error,
- 'an error occurred while internet connection sharing was being enabled'
i worked my way around that but now when clickin to bridge the connection i get this other error
- ' to create a network bridge, you must select at least two lan or high-speed internet connections that are not being used by internet sharing'
note i can bridge connections fine without share ticked. i have tried goin on CMD n resetting somestuff on there and have checked if certain services are enabled.
any clue? sorry this was a bit lengthy =|
Mike
it says error when i try to share the connection.