loading

This is how to use circutry boards and things.

i am not old, so this is very, very, VERY basic.

good for starters who want to learn robotics.

lets get started!

Step 1: Step 1: Servos and Wireless Connections

You will need one of those wireless toys or somthing.

dismantle it and get the circut board out if there is one.

you will need to get the servo and the wires.

DONT BREAK THE WIRES OR YOU LOSE

dont.

you will need the servo from the remote control too.

Step 2: Step 2: Circut Boards

Circut boards are very high tech.

so am i.

so circut boards come from many things, clocks, watches, tvs ( dont break yours).

for some breif description and a cool tutorial on them, go to my other tutorial.

( i only have 2 :P)

These are used for memory banks, power docks, power banks, and other things.

Step 3: Step 3: Motors and Vibrators

No more pictures :((((((((((((((((((((((((((((((((((((((((((((((((

but. But. BUt. BUT.

i still have knowlage.

motors are things that basically spin when connected with an electricacl current.

you will most likely find them in remote controlled cars ( rc cars)

vibrators vibrate when hit with a electrical current.

there is probably one in every phone in history.

dont break yours.

on to the next thing!

Step 4: Step 4: Motion Sensors, Solar Panels, and Buttons and Levers.

A motion sensor will probably be in your home security. DONT BREAK IT

a solar panel will probably be on a light, or you can purchase one at home depot, for about 10-20 $. the lights usually come with one too.

buttons are powered by there is a wire under the button. there is also an incomplete wire in the thingy you are using or the toy. when you press it down, the wire is connected with the incompleted wire and the power can go through. the lever works the same way, but up and down, or left and right.

Step 5: Thats All for Now!

Thanks for looking at this, and please follow for more electronical and biotech!

no haters please, because i am young. :D:D:D:D:D:D

thanks!

Step 6: There Is More >:D: All the Other Stuff I Didn't Mention.

LED lights , diodes, wires, fans, micro chips, pressure plates, dispensers, and hoppers.

LED: there is probably an led light in your old christmas box of decor. it is just a colored light. (duh)

Diodes: There are diodes in your phones, and in every piece of tech that has a screen. ( dont break anything)

Wires: the main component to every single electronic thing in history. (duh, again)

Fan: they are used to cool down computers, and laptops. basically a motor with wings...

Micro Chips: they contain all the data for your computer , ipad, i- somthing, and most electronic devices.

pressure plates are basically floor buttons.

Dispensers shoot stuff at you.

and hoppers carry one item to another area.

DONE.

:D :D :D :D :D :D :D :D :D :D :D :D

Pretty cool. Would've liked to know what I can do with these things. But still cool.
<p>You can do almost an infinity amount of things with these items, so i didnt want to list them all. 100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 is the number i estimate this=ngs you can do with these items. </p>

About This Instructable

1,928views

34favorites

License:

Bio: *DATA TRANSFER* *HUMAN LANGUAGE* Hello. I am a robot- ERROR* -Human, who enjoys building and using old items, found from what you humans call the ... More »
More by ElementMechanics:How to use electronic Circut Boards, and other things related How to make a Cyborg SlingShot 
Add instructable to: