With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
The newer versions of the Gilson Pipetman P2 and P10 Both Pipetman P and Neo (NOTE: Neos have been given the suffix-letter "N" to indicate the model ...
Both P2 and P10 models are very similar in terms of outward appearance. Look at the handles, no difference. Pipetman Neo's are given the suffix lett...
In these pictures both models are in the "long tip" position. They can handle DL10 tips and eject them properly using the tip ejector button. Notic...
It's easy to set the adapter for either size. Step one: Grap the adapter.
Pull the adapter away from the metallic rod.
You don't really have to do this, I just happen to take a picture of it off of the Pipetman.
Turn the adapter 180 degrees to show the OTHER slot on the adapter. In this case, the SHORT slot.
Put the desired slot carefully onto the metallic rod so the rod slides into the slot.
Push the adapter onto the rod until it "fits". You will feel the little bump on the rod engage into the dip on the adapter.
Now you will be able to not only fit both long and short tips...you will be able to EJECT THEM AS WELL!!!
You are now ready to aspirate and dispense effectively utilizing the right tips for the job! (and be able to eject them!)
Remove these ads by
Signing Up
Not NiceInappropriateSpam1,686 views
2 favorites
Posted:
Dec 15, 2009
License:
None (All Rights Reserved)
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »