Instructables

Eccentric-hub scooter / bike (no pedals)

FeaturedContest Winner
Picture of Eccentric-hub scooter / bike (no pedals)
Tim and Gael want to build a Hula bike .

Main Problem : how to easily displace the hub from the center of the wheel ? Play around with spokes ? No ! way too painful . But Tim is a carpenter and has access to a router . 

So They decided to craft it out of plywood planks . Quick, easy,  strong enough, not that awful, and works fine.




 
Remove these adsRemove these ads by Signing Up

Step 1: Wheel building .

Picture of Wheel building .
DSC00378.JPG
DSC00379.JPG
hub.jpg
For this step, we used a router to cut two planks into circles . We cut them in two parts, at 1/3 of the edge to be able to put them around the hub. The hub being wider on its extremities, we couldn't simply drill a hole and slide it onto the hub . We took care to alternate the cutting directions , so the wooden assembly stay strong .

Also, we checked the 1/3 rapport was good enough to allow the wheel to spin without rubbing against the frame . It was a wheel from a smaller bicycle .

Step 2: Bike structure and finishing touches .

We took the pedals off, raunchily welded a bar instead, at the extremities of which we placed inner tubes straps, for user's relative safety. The front berake stayed in place, but we of course had to take off the rear one . It could be possible to have one, but our goal was to keep things easy to set up .

Step 3: Extra Special bonus videos

Picture of Extra Special bonus videos
randomray1 year ago
Right , now I don't plan on building one of these , but I was wondering how I could build wooden wheels and still have rubber tires . I thought this method might work , but hadn't tried it yet . Thanks for proving the idea for me . Saved me some time . Great job guys .
e1ioan1 year ago
That's awesome!
Wait. What is the point?
1. just because, or
2. I saw one built for a man with dwarfism. regular bikes didn't fit his proportions.
Yah, but why do you need to make all the parts out of wood???
Simple and easy to prototype with. cheap, and easily replaceable, too!
Hamzah1 year ago
awesome
wthit561 year ago
Pretty cool... "Pogobike"!
Cool project!

I think you should add the terms "eccentric-hub scooter" and (or) "whymcycle" to the search terms, or maybe even the title.

Hula-bike is a specific product made by a company, much like the Ingo-Bike in the 1930s.

Wikipedia - Eccentric-hub scooter
Gael - Tim (author)  LegoBrickMaster71 year ago
Thanks a lot for the advice, I'm changing the the title and adding the terms you suggested.
I'd only heard of the hula-bike as a commercial version of this type of bike but I find the Ingo-bike you evoked much cooler!
Once again thank you for the tips.
Awesome project Gael - Tim! When I was a kid my grandparents had a "Kangaroo Scooter" noted in the Wiki LegoBrickMaster7 noted, and I always wanted to find one when I got older - now I can make one out of my busted bike!
Gael - Tim (author)  Jhokur1 year ago
Cool! If you need any help in the process of building yours, go ahead and ask questions, I'm glad to help!
WHAT IS THE MAXIMUM SPEED IN THAT BIKE ?
Gael - Tim (author)  AVE DE FUEGO1 year ago
You can go at a reasonable speed but the faster you go, the more it shakes aroud and eventually if you go too fast (downhill for example) you'll get thrown off the bike ...
Beautiful South of France … 
How come do you have such a nice weather ?...
It's supposed to be raining all over the country !

Great project too !!!...
Gael - Tim (author)  vincent75201 year ago
Yeah, South of France. We're lucky...
rickpaulos1 year ago
I built 3 similar bikes last year.

But I calculated the spoke lengths needed to rebuild wheels,
I did both front & rear wheels,
I used a standard coaster brake hub, cranks, pedals and chain.
yehaw!

http://www.youtube.com/watch?v=nisn6lmi9tQ

rick
Gael - Tim (author)  rickpaulos1 year ago
Nice video and above all, real nice job!
We considered using spokes too but it felt a little too ambitious so we went for the easy way... However I have to agree that spokes look way cooler than big planks of wood :-)
Gael - Tim (author)  Gael - Tim1 year ago
Disc brakes would look extra cool on one of your bikes!
I thought of disc brakes, briefly. It would be easier to use a disc brake bike to start with. Maybe in a future build when I find a suitable doner bike. Discs are an alternative because a rim brake won't work, well not as you might expect.

Thanks, rick.
I like the wood! They just need finishing. Stain & Varnish or some eye popin' paint job.
Et avec les deux roues excentrées ??…
rickpaulos1 year ago
I like the way you added that extra odd shape of board to reinforce at the hub. Kinda shaped like a Wankel engine rotor. Add some pop-art paint in some psychedelic pattern! Wuuuuw doooood.
mwm3411 year ago
I get ideas about this thing powered by steam...
jakobus91 year ago
that's hilarious!
brilliant, but hilarious!
if you ride this to work you'll have a tons of muscles is a matter of weeks :D
diyer81 year ago
@theyesman I would think that making the axis closer to the center would reduce the effort required and increase speed - albeit providing less torque & making uphill more challenging.

=> here's an idea, make the equivalent of a gear box by making the distance of the axle to the center of the wheel adjustable while riding!
theyesman1 year ago
That is awesome, i want one! Does it take a lot of effort to use it?
Gael - Tim (author)  theyesman1 year ago
Yeah it's quite tiring, it's definately not made for distance and you don't want to come upon a hill (either going up or down). :P
Thanks for the comment!
Metafire1 year ago
That motion reminds me a lot of this instructable.

http://www.instructables.com/id/How-to-Fly-a-Human-Powered-Hydrofoil---the-Aqua/
fozzy131 year ago
That's pretty sweet. I like it : )
rimar20001 year ago
Very interesting, congratulations.
Gael - Tim (author)  rimar20001 year ago
Thank you, Sir!
Kiteman1 year ago
Bike bounce, make Kiteman smile!
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!