Print PDF
Favorite
Email
Step 2Materials of the Daleks
Much like the proton packs I have built, much of this costume came from stuff I already had laying around . . . or at least, that was the original plan. I used several things I already had, but some stuff I had to buy this time. I probably spent most on the spraypaint, which it turned out I needed a lot more than I had at hand.
Usually on this step, I would give a pretty exhaustive list of things required, but because of the convoluted way this was done I will simply list the tools I used, then be specific about materials on each step further along.
Tools required:
Usually on this step, I would give a pretty exhaustive list of things required, but because of the convoluted way this was done I will simply list the tools I used, then be specific about materials on each step further along.
Tools required:
- Hot Glue Gun
- Soldering Iron
- Dremel / Rotary Tool
- Pliers (Needle Nose and Standard)
- Sturdy Scissors
- Box Knife
- Ruler
- Square
- Long Straightedge
- Wire Cutters
- Drill
- Good Epoxy (If I keep pimping E-6000, do you think they'll sponsor me or something?)
- Awl
- Punch
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
