Huntsman Knife Part 2

This is part 2 were I make the handle

STEP 1: Marking

I marked the knife on the wood also I did a few thing to the knife to make I look better

STEP 2: Cutting

Use a saw or jigsaw to cut handle out then cut in half

STEP 3: Glueing

Use two part epoxy on handle then apply pressure on knife and wait for dry

STEP 4: Sanding

Use a wood file and sandpaper to make a handle to fit your hand

STEP 5: Paint or Lacker

I painted the handle with black paint then after two days I decided to use lacker on handle

STEP 6: Sharpening

Use a bench grinder first for a rough sharpening then use file and sandpaper for a nice sharp blade but I'm go going to have I bit blunt because I'm gonna use it for hacking branches

STEP 7: Done

Please like and comment any ideas