Introduction: Hymn of the Dead

Picture of Hymn of the Dead

This is my all time favorite thing I've created. The bolt works and can be used very quickly

Step 1: Upper Receiver

Picture of Upper Receiver

The broken pieces in this step cannot be substituted

Picture 1 is what will be made

Pictures 6, 7, and 8 are all in pictures 9

Picture 9 will be added in picture 15

Step 2: Lower Receiver and Trigger

Picture of Lower Receiver and Trigger

The broken pieces used in this step cannot be substituted

Picture 1 is what will be made

The white rod in pictures 5 is essential and should not be forgotten

The extra 2 parts in picture 6 are added in pictures 11 and 13

After picture 24 add the other side and the lower receiver is complete

Step 3: Barrel and Grip

Picture of Barrel and Grip

Picture 1 is what will be made

Pictures 6, 7, and 8 must be in this order and fashion in order for the magazine to stay in properly

Step 4: Stock

Picture of Stock

Picture 1 is what will be made

The orange connectors in picture 3 are not necessary

In picture 4 the white rod is in between the two connectors

The white rod used in picture 9 from picture 8 is not necessary

Step 5: Handle

Picture of Handle

Picture 1 is what will be made

There are 14 grey two way connectors in picture 8

Pictures 15-17 are for comfort only and are not necessary

Step 6: Bolt Mechanism

Picture of Bolt Mechanism

Picture 1 is what will be made

There are 13 3 way connectors in pictures 8 and 8

The spacers added in pictures 12 and 13 should not be there

Step 7: Magazine

Picture of Magazine

The magazine can be extended downward for a higher capacity magazine

Picture 1 is what will be made

The broken rods in pictures 3 and 4 are the only ones necessary, the rest are for support and are not needed

Step 8: Connecting Parts

Picture of Connecting Parts

Picture 1 is all the parts

Pictures 2-5 are connecting the upper receiver to the lower receiver

Pictures 6 and 7 are connecting the receiver to the barrel

Pictures 8 and 9 are connecting the handle to the receiver

Picture 10 is connecting the handle to the trigger guard

Pictures 11-15 are connecting the stock to the lower receiver and the handle

Pictures 16-20 are connecting the bolt mechanism to the upper receiver and the stock

Step 9: Rubber Bands

Picture of Rubber Bands

Picture 1 is a small rubber band on the trigger

Picture 2 is the rubber band used for the ramrod in pictures 3 and 4

Step 10: How to Use

Picture of How to Use

Pictures 1-3 are showing how to put the magazine in. Once the magazine is angled in as shown in picture 2, just apply pressure upward and the magazine will slide in. To take the magazine out just pull it forward and down

To shoot, pull the bolt back as shown in picture 5, then pull the bolt back forward as shown in picture 6 then the gun is ready to fire

Step 11: Enjoy

Picture of Enjoy

I hope you enjoy my creation. If you have any questions or comments feel free to drop them in the comments section and I'll get to them as quickly as I can

Comments

sandroknexmaster (author)2016-04-06

Nice!

Kona-chan (author)2016-01-19

I love the idea only IMO your chamber mech is ouy dated :/

lemonpickle (author)Kona-chan2016-01-19

How many systems are there .-.

Kona-chan (author)lemonpickle2016-01-21

Atleast 5 of them, semi auto, repeaters even, pump and bolt actions, side chargers, hammer actions :/

master-splinter306 (author)2016-01-21

Incredible job man!

TheDunkis (author)2016-01-20

Ah, this reminds me of the good ol' days, a nice mix of classic and modern K'nex gun building styles. I agree, the chamber is a bit old. It's about as good as it gets for tube barrel guns, but we've moved away from using tube barrels for repeaters to avoid having to use cut pieces. Likewise, it's a bit disappointing to see magazines with cut pieces, but that's just my personal pickiness. Otherwise it looks like a nice weapon, so keep at it.

TheDunkis (author)2016-01-20

Ah, this reminds me of the good ol' days, a nice mix of classic and modern K'nex gun building styles. I agree, the chamber is a bit old. It's about as good as it gets for tube barrel guns, but we've moved away from using tube barrels for repeaters to avoid having to use cut pieces. Likewise, it's a bit disappointing to see magazines with cut pieces, but that's just my personal pickiness. Otherwise it looks like a nice weapon, so keep at it.

MonkeyKnexer15 (author)2016-01-20

i am probably gonna mod the barrel

Linkin_J_Knex (author)2016-01-19

Looks good =)

About This Instructable

287views

3favorites

License:

Bio: I enjoy creating.
More by lemonpickle:Hymn Of The Dead -Chamber/ Magazine UpdateHymn of the DeadKnex commando
Add instructable to: