Step 32: Assembling the Crown

Because the panels were not 90 degrees, I had to do a special dado-slot for the base of the grown. I built a table saw jig and made an angled dado in each panel to fit the base.

Then I made a glue-up jig and brad-nailed and clamped the entire assembly together while the glue set. In order to test fit, I clamped it too the upright bars so I could get a feel for the shape.

<p>amazing, me and my friend are going to make it at our school</p>
<p>Amaizing project. </p>
<p>Whoa. Interesting bit about the sun-bleached ABS -- it's quite beautiful!</p>
<p>truly amazing process. </p>
<p>congrats Gabe! Looks so great man! Love the design &amp; process!</p>
so difficultT_T
this is so beautiful
<p>Very, very cool project! I really enjoyed reading your process in making this. </p>

About This Instructable




Bio: Interdisciplinary Artist
More by gabrieldunne:NAAG XY Hyper Terra Tetra Table 
Add instructable to: