Introduction: I-pod/mp3 Tri Fold Wallet
This is a simple quick and easy tri fold wallet with i-pod/mp3 pocket.
All you need is: paper (8.5-11), I-pod nano or other small mp3 (I have only tried with Ipod), some clear package tape and some thing to cut out the button/screen holes. The full paper wallet with Ipod is a little less thick then empty leather wallet.
Step 1: Measure and Fold
Hope fully you can look at pictures to figure out most of this.
1 Fold in half
2 Measure money size, line up dollar on left side of paper with non folded end facing down, fold bottom edge up and make sure a dollar will fit.
3 measure Ipod/mp3 align to right side fold
4 fold left side so it align with the right side
As I said look at pictures.
Step 2: Cut the Button Holes Out
Now we just have to make the pouch for I pod.
1 tape the area, this ads durability
2 measure and cut out screen and other buttons only cut first layer of paper
3 cut head phone slit
4 my Ipod has a belt clip so cut a little room for that if you have one
5 tape right top end shut.
6 tape the left end shut.
If you did'nt get this look at the pictures
You're done, please feel free to mod this
We have a be nice policy.
Please be positive and constructive.