Introduction: [INSTRUCTIONS]: K'nex Ballmachine Limonium
My name is Gargamelknex, and I make k´nex instructions...
YES! My first ballmachine, names LIMONIUM, is done! It´s a simple machine with 7 lifts and 6 paths.
The aren't new elements/lifts... Sorry, thit is my first ballmachine.
LINK TO PICTURES AND VIDEO: https://www.instructables.com/id/PICTURES-VIDEO-Knex-ballmachine-LIMONIUM/
READ THIS WHEN YOU BUILD IT:
This machine works not for 100%, you should sometimes modify it by yourself.
Some pieces can you change with other pieces.
It's a very DIFFICULT, and a LONG time building, and MUCH pieces.
The instructions are DIFFICULT too, only experienced knex'ers able to build it , and it will take much time.
When you haven't enough k'nex, sorry :(...
THEY ARE 1.202 PICTURES IN THIS INSTRUCTABLE!.
Step 1: The Base
DON'T BUILD THE GEARS!
It's from sorunome's lift...
It was too hard for my to make the lift :D
Step 2: White Floor
Begin by te last photo.
Step 3: Towers (1)
Step 4: Towers (2)
Step 5: Lifts (1)
For better pictures, you should go to:
Wheel lift (blue): https://www.instructables.com/id/Knex-Wheel-Lift/
Connected arm lift: https://www.instructables.com/id/Connected-Arm-Lift...
Shifting arm lift: https://www.instructables.com/id/Knex-Shifting-Arm-...
Step 6: Lifts (2)
For better instructions, you should go to:
Center arm lift: https://www.instructables.com/id/Center-Arm-Lift-a-...
Sandro's wheel lift: https://www.instructables.com/id/Sandros-Wheel-Lift...
Step 7: Lifts (3)
For better instructions, you should go to
Up and down lift: https://www.instructables.com/id/Up-and-down-lift-a...
Semi Circle Lift: https://www.instructables.com/id/Knex-Semi-Circle-L...
Step 8: Path 6
The rollercoaster path
Step 9: Path 1
The simple path
Step 10: Path 4
The ferris wheel path
Step 11: Path 2
Woooow! Much pictures here!
Step 12: Path 5
All the elements are here from sandroknexmaster!?