Introduction: IPhone 6 Wall Mount Dock
I wanted to have a wall mount for my iPhone 6. The functionalities I wanted to have are
- a place to mount my Phone
- and where it can be charged at the same time.
Step 1: General Thinking About the Design
First I thought about the general Design and came up with sketches.
I wanted to use the plug for mounting the Dock so I decided to have something that slides on the plug.
Next I wanted to have something where i can hide the charger wires, so I created some space to put it in
And at least I needed some area to place the phone
Step 2: Modeling the Dock in Autodesk Fusion 360
In this step I used Autodesk Fusion 360 to design the 3D File for Printing. You can see the Video of the design process and the iterations
Step 3: Create the Stl File for 3D Printing
I used the 3D Printing function of Fusion 360 to generate the Stl File.
Step 4: 3D Print the Wall Mount
In this last step you have to use your 3D Printer or a printing service to make the phone dock.
We have a be nice policy.
Please be positive and constructive.