Introduction: IPhone5 Holder & Storage, Wrist Cuff - Star Wars: Rogue One

What I've created here is a iPhone5 Holder & Storage, Wrist Cuff - inspired from the movie Star Wars: Rogue One. The software's I've used to design this was a combination of Visi19.0, 3D Builder, Autodesk Netfab Premium & 123D Design.

Needs 2 - 2mm x 10mm magnets for the latch
Also what you may want to do is glue some 1/2" foam to the bottom side where the cuff sits on your arm so it sits better for you, more comfortably.

THIS DESIGN HASN'T BEEN PRINTED (yet): In case you want to test it out, I would love to know if you could post pictures of the model finished and review how it works.

I have 14 other models not including this model if you're interested in taking a look at them they're all in the 3D printing contest. If you like them please consider leaving a comment, I would loooove to hear your feedback and also consider clicking that vote button, I would really appreciate your support.

Thanks and Enjoy!

More cool 3D ready prints here: https://pinshape.com/users/170994-catzzo#

by clicking the link below you will find videos on how your able to use software (Autodesk 123D Design free software here: http://www.123dapp.com/design) in designing your own iPhone holder wrist cuff.

https://www.youtube.com/user/ProfDrafting/videos

Step 1:

Step 2:

With this video series I've added to this instructable (I highly recommend is a great way for you to learn this free software) you will be able to learn the basic know how in creating your own iPhone holder and storage wrist cuff.

Comments