Picture of Ice Fishing Chopstick Bobber
This is how to make an UL/L (Ultra Light/Light) bobber for ice fishing.
You need:
A chopstick 
bright Krylon  paint
 1/4 oz lead weight
thin wire
stir straw
hot glue 
wine cork
Pocket knife/ multi tool 
Remove these adsRemove these ads by Signing Up

Step 1: Floatation

Picture of Floatation
Bore a hole in the cork and push the chopstick through with the thick end ^up^

Step 2: Stabilization

Picture of Stabilization
Now thin the bottom end of your bobber and glue your 1/4oz lead weight to the thinned out part.

Step 3: Color

Picture of Color
paint the thick end (the top) a bright color Using Krylon outdoor Paint

Step 4: Bore out holes

Picture of Bore out holes
Bore a hole in the top and botton(use stir sticks, wire, and hot glue too support the bottom of the float)

Step 5: Your done!!!!!

Picture of Your done!!!!!
It works too!! Thread your line through the two holes and use it as an adjustable depth bobber.