Not an oyster fan? No worries! Fill the shot glass with your favorite liquor and bottoms up!
Ice Shot Glass Mold or DIY Ice Shot Glass
Kettle One
Stirrings Simple Bloody Mary Mix
Four freshly shucked oysters
Lime wedges for garnish
Jigger
Fill each ice shot glass mold with 1/4 cup water. Put top's on the mold and place in freezer for two hours or until frozen.
In the meantime, make the bloody mary shooter mix. Pour four jigs of Stirrings Bloody Mary mix and two jigs of Kettle One into a measuring cup and stir to combine. Place the mix in a container and store in the frige until shot glasses are ready.
Once the shot glass are ready, place the mold bottom side down under warm water. If the water is too hot, the shot glasses will crack. The glases should easily fall out. Place them back in the freezer until you are ready to serve them. The ice melts rather quickly.
Place an oyster in the bottom of each shot glass and fill the top of the shot glass with the bloody mary mix. Garnish with a lime & one, two, three, SHOOT!
Cheers!
scoochmaroo
says:
Jun 25, 2012. 9:27 AMReply
lmnopeas (author)
in reply to Jun 25, 2012. 10:20 AMReply

















Not Nice


















Visit Our Store »
Go Pro Today »



