Print PDF
Favorite
Email
Step 9Taping the Middle Layer
The middle layer will only have the outer edges taped with aluminum tape, so that the backlight can shine through.
Take strips of aluminum tape and cut them in half. Peel off the backing and frame all the way around the edges. As with the bottom panel, make sure the LEDs are not being shorted out.
Take strips of aluminum tape and cut them in half. Peel off the backing and frame all the way around the edges. As with the bottom panel, make sure the LEDs are not being shorted out.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
