Print PDF
Favorite
Email
Step 10Attach the Frame
You'll want a gap between the back of the board and the wall so that when you hang it it will be flush with the wall.
Grab a book or similar object that's about 1/4 inch thick.
I used masking tape to hold the lath in place. Use a few nails to attach it to the panel. It's great to have help for this step. I used a pair of pliers to keep the nail from angling as I tapped it in. Use a light touch to reduce the chance that you'll dent the wood frame.
Nail on the other long side.
Tape the short sides in place and nail them as well.
Grab a book or similar object that's about 1/4 inch thick.
I used masking tape to hold the lath in place. Use a few nails to attach it to the panel. It's great to have help for this step. I used a pair of pliers to keep the nail from angling as I tapped it in. Use a light touch to reduce the chance that you'll dent the wood frame.
Nail on the other long side.
Tape the short sides in place and nail them as well.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
