Print PDF
Favorite
Email
Step 9Prepare the Frame Pieces
Cut two pieces of lath the length of the long side of the board.
Cut two pieces of lath the length of the short side of the board PLUS the thickness of the lath on the long sides. This is to make the corners fit up properly.
Sand as necessary to make them fit up as well as possible.
I chose to paint my black with spray paint. Give them a good coat of black paint on all sides.
Cut two pieces of lath the length of the short side of the board PLUS the thickness of the lath on the long sides. This is to make the corners fit up properly.
Sand as necessary to make them fit up as well as possible.
I chose to paint my black with spray paint. Give them a good coat of black paint on all sides.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
