Print PDF
Favorite
Email
Step 3The central back panel must be narrowed
The back panels are designed to fit into the side panels' grooves, and are hence wider than the inner width of the shelves.
The two side panels around the central shelf will have no groove on their side towards the central space. Hence, the central back panel needs to be narrowed. It must have the exact width of the shelves.
1. Protect the cut line with adhesive paper tape; use a shelf to mark the width on the tape
2. Cut the back panel
3. Sand it
The two side panels around the central shelf will have no groove on their side towards the central space. Hence, the central back panel needs to be narrowed. It must have the exact width of the shelves.
1. Protect the cut line with adhesive paper tape; use a shelf to mark the width on the tape
2. Cut the back panel
3. Sand it
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
