Introduction: Improving My Car Pc Mount.

Picture of Improving My Car Pc Mount.

My car pc is a gem for my old honda civic.

https://www.instructables.com/id/My-Car-Automation-...

Recently it has become to get loose from the velcro I used to stick it onto the centre console. I have spare pvc trunking so I decided to make supporting clips for the netbook.

Step 1: Cutting the Clips.

Picture of Cutting the Clips.

Using my cutting tool I cut two segments off the trunking.

Step 2: Making Mounting Holes.

Picture of Making Mounting Holes.

I drilled 2 holes per clip and also onto the backplate that the car pc is velcro stuck onto.

Step 3: Putting on the Clips to the Backplate.

Picture of Putting on the Clips to the Backplate.

I cable tied the clips onto the backplate. These will now take the weight off the velcro strips I have been using.

Step 4: Completion.

Picture of Completion.

Here is the car pc with the clips taking the weight. Eventually I may paint the clips black but for now I'm pleased!

Comments

About This Instructable

664views

7favorites

License:

Bio: As of April 2017 I have decided to no longer post on instructables. The fact that several of my published works have been removed without ... More »
More by Mjtrinihobby:External Light Sensor Night Light.Replacing a Toilet Tank Float Valve. How to Make Pig Feet Souse!
Add instructable to: