Instructables

Improving Simple Doorstops with Sugru

Picture of Improving Simple Doorstops with Sugru
20130718_195003.jpg
IMG_20130805_215951.JPG
At our makerspace we have a lot of simple wood door stops to keep doors propped open. Unfortunately the wood-on-wood action of our doorstops and floors can cause slippage of the doorstop or nasty scuff marks on the floor. A simple solution to this was created using Sugru.

Materials
- 1x simple angled piece of wood that fits under a door
- 1x packet of Sugru
 
Remove these adsRemove these ads by Signing Up

Step 1: Apply Sugru to Doorstop

Picture of Apply Sugru to Doorstop
Take a fresh packet of Sugru and evenly apply it all to the enter bottom of your makeshift doorstop.

Step 2: Let Sugru Set

Let the Sugru set for 24 hours. This can be accomplished by setting your new door-stop somewhere where it won't be disturbed.

Step 3: Finished!

Picture of Finished!
Now that your new Sugru enhanced door-stop is set, you can use it to prop open your favorite door on wood floors without worrying about slipping or scratches.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!