Print PDF
Favorite
Email
Step 5Cut and Strip
As I said, the fan has a 4 prong connector for attaching to a PC power supply.
After testing which wires I needed It was obviously the green shrink wrapped wires.
I off the 4 prong adapter and stripped 3/4" of heat shrink from the end of the green cord.
This revealed 2 wires, I soldered the positive to the middle of DC power jack, and the negative to the outer tab.
After testing which wires I needed It was obviously the green shrink wrapped wires.
I off the 4 prong adapter and stripped 3/4" of heat shrink from the end of the green cord.
This revealed 2 wires, I soldered the positive to the middle of DC power jack, and the negative to the outer tab.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
