video Incandescent Lamp Hack!
Amazing candle of a incandescent lamp
blblbl2 years ago
Using a coin is a horrible idea because... IT'S USING MONEY!!!
Rmstrjim5 years ago
Might want to find another solution other than epoxy for the top, it's clearly being heated significantly by the open flame, and may offgass the chemicals listed below  into whatever room you put this lamp in.

carbon monoxide, carbon dioxide, nitrogen oxides, hydrogen chloride, iron oxides, chlorine, aldehydes, acrylic monomer fumes, sulphur oxides, aromatic amines, ammonia, isocyanates, hydrogen cyanide, and, at high temperatures, trace amounts of 3,3' dichloro-benzene

Also you know that funky insulation between the Metal base and glass bulb? Well apparently it's made from Lead Oxide so that can't be good am I right?
First two are already produced by open flame, since you are burning fat some nitrogen oxides are can be produced as well. But I agree, heated/burning epoxy is nasty.
Yeah, those first 3 aren't the chemicals anyone is concerned about.
Yeah but it said high temperature epoxy...
JKPieGuy3 years ago
If you do this DON'T RUIN A PERFECTLY GOOD LIGHTBULB!!!!! Use one that's burnt out which would be thrown out anyways
collin934 years ago
Finished this today and within 3 minutes of lighting, the light bulb started cracking around the screw-in base. Thoroughly disheartened.
dewmi5 years ago
can we use olive or vegetable oil ?
 whoah putty epoxy
i have to mix mine ;(
lyzyrdman6 years ago
Cool project, but dont drop it or you will have a molotov.
dont give me ideas
Blasted! I have to try this now!!
ive done this b4 its amazing.
a molotov cocktsil its simmiar to a eptrol bomb i think
sharlston6 years ago
what do you fill it with?
Gasoline, or Kerosine. BTW genius idea about the lightbulb malatov cocktail! :)
H3xx5 years ago
Something to do for when the power goes out. Would this work without the wick like for an alcohol stove?
tcup6 years ago
Could use air dry clay to pretty it up a bit.
How long does that much oil burn for? Looks wonderfuly easy!
Newblit6 years ago
HOw long did you have to wait for the fluid to soak up all the way?
Hold it upside down for a few seconds...
bumpus7 years ago
Been there, done that...
With a magnetic base, too...