Print PDF
Favorite
Email
Step 2Remove back of transmitter
WARNING!!!! - Proceed at your own risk! There is always a possibility that you might break your thermometer. This will also void your warranty!
First of all, make sure you are working with the transmitter and not the receiver (see photos below for transmitter).
Remove the 6 screws on the back of the transmitter. You may not be able to take them out completely due to rubber washers on the inside of the case. Be careful not to lose the screws or rubber washers.
First of all, make sure you are working with the transmitter and not the receiver (see photos below for transmitter).
Remove the 6 screws on the back of the transmitter. You may not be able to take them out completely due to rubber washers on the inside of the case. Be careful not to lose the screws or rubber washers.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
