Print PDF
Favorite
Email
Step 3Cutting all the shelf pieces
Tools:
Pencil
Tape Measure
Miter Saw (This could be replaced with a hand saw easily)
Materials:
1"x4"x6' Pine (with or without knots, up to you, or any other wood for that matter)
The shelves are made from three pieces of wood. The vertical piece that attaches to the wall, and the two horizontal pieces that attach to the vertical piece and stick out then have the steel cable fit into.
Per shelf you have 2 pieces at 19" and 1 at 16"
Pencil
Tape Measure
Miter Saw (This could be replaced with a hand saw easily)
Materials:
1"x4"x6' Pine (with or without knots, up to you, or any other wood for that matter)
The shelves are made from three pieces of wood. The vertical piece that attaches to the wall, and the two horizontal pieces that attach to the vertical piece and stick out then have the steel cable fit into.
Per shelf you have 2 pieces at 19" and 1 at 16"
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
