Print PDF
Favorite
Email
Step 7Installation
Tools:
Drill
Level
Ladder if needed
Screw driver
Materials:
Heavy Duty Hook
Start by finding the stud to screw hooks into. Install hooks, use a screw driver to help turn the hooks.
VERY IMPORTANT: Make sure that the hooks are attached to a stud or top plate! Doubtful it will stay up otherwise.
Us a level and come down 24 3/4" from the hook and make a mark. Install first shelf with top of vertical board touching this mark. (3/4" is the offset for the thickness of the horizontal board.) Then come down 16" from top or first shelf's vertical board and make a mark. Install next shelf with top of vertical board touching this mark. Repeat for number of shelves.
Hang the 2 steel cables and install onto boards by sliding the cable through the groove and setting the stopper onto the 3/8" holes.
Put stuff on shelves... and your done.
Drill
Level
Ladder if needed
Screw driver
Materials:
Heavy Duty Hook
Start by finding the stud to screw hooks into. Install hooks, use a screw driver to help turn the hooks.
VERY IMPORTANT: Make sure that the hooks are attached to a stud or top plate! Doubtful it will stay up otherwise.
Us a level and come down 24 3/4" from the hook and make a mark. Install first shelf with top of vertical board touching this mark. (3/4" is the offset for the thickness of the horizontal board.) Then come down 16" from top or first shelf's vertical board and make a mark. Install next shelf with top of vertical board touching this mark. Repeat for number of shelves.
Hang the 2 steel cables and install onto boards by sliding the cable through the groove and setting the stopper onto the 3/8" holes.
Put stuff on shelves... and your done.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
