Instructables

Industrial looking TV shelf / ledge

Step 1: Tools and Materials

Tools:
Pencil
Tape Measure
Miter Saw
Drill
3/32" counter sink drill bit (for screw pilot hole drilling)
Bar Clamps
Palm Sander (I love this sander for how easy it is to install the paper taut)

Materials:
1"x4"x6' Pine (with or without knots, up to you, or any other wood for that matter)
1 5/8" Drywall Screws
150 Grit Sand Paper
Stain
Rags
Masking Tape
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!