Print PDF
Favorite
Email
Step 8Installation
Tools:
Drill
Level
Ladder if needed
Screw driver
Materials:
3 Heavy Duty Hooks
Start by finding the stud or top plate board to screw hooks into.
VERY IMPORTANT: Make sure that the hooks are attached to a stud or top plate! Doubtful it will stay up otherwise.
Next use a level to make sure the hooks are level. Install hooks, use a screw driver to help turn the hooks.
Hang the 6 wires, back ones go on first, then front ones. Next install boards onto the stoppers by sliding the cable through the groove and setting the stopper onto the 3/8" holes.
Put stuff on shelves... and your done.
Drill
Level
Ladder if needed
Screw driver
Materials:
3 Heavy Duty Hooks
Start by finding the stud or top plate board to screw hooks into.
VERY IMPORTANT: Make sure that the hooks are attached to a stud or top plate! Doubtful it will stay up otherwise.
Next use a level to make sure the hooks are level. Install hooks, use a screw driver to help turn the hooks.
Hang the 6 wires, back ones go on first, then front ones. Next install boards onto the stoppers by sliding the cable through the groove and setting the stopper onto the 3/8" holes.
Put stuff on shelves... and your done.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
