Picture of Inexpensive DIY Under-Cabinet Lighting
In this instructable you will learn how to set up and install inexpensive under cabinet lighting in your home with minimal cost and difficulty using affordable cold cathode tubes normally used for PC case mods. This is my first instructable. I will do my best to make it clear and easy to follow.


Previously when you prepared food in my mom's kitchen you would be standing between the ceiling light and your work surface, thus casting a shadow. Additionally, under cabinet lighting tends to look nice. It's quite the dramatic effect in person and definitely stepped up the look of the kitchen a lot. It's less harsh of a light in person and significantly improved visibility while working in the kitchen.

Cost & Power Usage

I was able to light my mom's entire kitchen for under $40.00 including all parts. Additionally, the lights are quite power efficient, using about 3 watts per light tube (I used 6 pair / 12 tubes total). Total wattage=36 watts, or 3amps at 12V. This is a little over half the power usage of a normal 60watt incandescent bulb. Your final project price will vary depending on your supplies and the size of your kitchen.

Compare With and Without

1. Under cabinet lighting on, Ceiling light off.
2. Under cabinet lighting off, Ceiling light on.
3. Both under cabinet lighting on and ceiling light on.
1-40 of 58Next »
zbfx24 days ago

Awesome! Also, this is the cutest kitchen ever.

Great. Fast. Cheap. Beautiful. Useful. Thank you.

nodoubtman3 years ago
what is an inverter?

olsonbri3 years ago
Thank you! This is excellent. Bought a house last year and now we're trying to make a closet w/shelves out of the area under the stairway that was totally closed off. Space is tight... want to keep the mini-renovation costs to a minimum. I found the answer for lighting the shelves here!

I plan to use my old 400W desktop PC power supply.... I'll never use it for anything else.

Great work and thanks for the post.
phayd5 years ago
 You do not want to use velcro in a kitchen. Over time, grease, soot, and nasties in the air will clog the fibers and create a non-sticky, nasty mess. This mess will cause the velcro to fail, most likely into whatever recipe you are working on, which doesn't include lighting.
scottinnh phayd4 years ago
You are talking about the black hook and loop stuff which is just one type or model of Velcro. There are many kinds of Velcro, including coarser stuff that clogs less, and stainless.

In a home and above your sink, even the regular stuff is not going to get clogged. You would need to do so much deep frying that everything else in the kitchen gets ruined also. :-)
bngrndr2895 years ago
I'm actually in the middle of doing this lighting project right now.
GB (Gardner Bender) makes 3/4" cable plastic staples that mount
these cold cathode tubes perfectly. Use one at each end of the tube.
I swapped out the nails normally used to fasten the staples with
two #4 by 7/8" wood screws. Staples are white in color and are
part number PS-1575. You can get them at your local hardware
store for a couple of bucks for a package of 15.
GB staples.JPG
StaceyW5 years ago
Definitely go LED.  It will last as long as your cabinets and cost you nothing to run.  www.saviolighting.com/WAC-InvisiLED-Tape-Light-p/wa-led-t.htm

I got these installed a month ago and I've loved it ever since. 
bmlbytes6 years ago
You broke the instructables rules. Its like rule one of the rules. You must use LEDs for all lighting. I thought everyone knew this : ) Although cold cathode tubes are cool too.
Actually, the rules state, they must either require high voltage, high efficiency, or both. ;-) This is both.
wait . it don't have to all ways be about LEDs it can be some thing else =-p
dustinbolton (author)  bmlbytes6 years ago
haha, yeah I know. I'm surprised they didn't kick me for it! :) I thought about using LEDs then decided it would horribly complicate this. I would either have to connect a ton of cheaper LEDs to get the same amount of light as one of these tubes or else use expensive high output LEDs. Not to mention issues with mounting, diffusing the beam, connecting hundreds of little wires and resistors, etc. I do look forward to cheaper high output LEDs though...
These guys sell LED Strips that are pretty reasonable. I haven't bought from them but the strips look like they would be good for a project like this.

Careful with LEDs not intended for residential lighting. As you know, there are all sorts of colors that are called "white". Typically, LEDs are cheaper and more efficient at higher color temperatures, but put off a bluer light. The softer/warmer light creates more heat and requires some sort of thermal management to keep from killing the LED/light engine.

For reference, incandescent bulbs put out light around 2,800K (energy star calls this 'soft white'), quartz halogen ~3,000K ('warm white'). Residential LED fixtures put out by major manufacturers tend to be 2,800K, 3,000K, or 3,500K. Commerical offices tend to run around 4,000K. The "daylight" bulbs put out around 6,500K.

The DOE solid state light website does a good job of discussing LED lighting: http://www1.eere.energy.gov/buildings/ssl/index.html
vectorges6 years ago
The lights that I see in the catalog are meant to go inside a desktop PC. Is there any reason not to use a desktop power supply for this as opposed to the laptop power supply? The laptop is prettier, but the desktop could be hidden or made into a cabinet. Mostly I have several of the desktop power supplies in my arsenal and the power plugs even look right. Oh yeah. I love the instructable. And my kitchen is now in pieces.
heltones6 years ago
Good instructable. Undercabinet lighting is a great feature for a kitchen. I have only one comment not covered by someone else yet (that I noticed). It's kind of a safety issue to have an unprotected breakable glass element over a food prep area. You should really consider putting an acrylic shield over the bulbs/tubes. Building/electric codes require it. I say that because they tend to be safety-oriented, not in a big brother way. Good work.
dustinbolton (author)  heltones6 years ago
The cold cathodes used here come inside an acrylic tube sealed at both ends. Very good point though if someone gets some different tubes from another source that aren't encased! I didn't think to mention that. Thanks!
kerns6 years ago
How could you install this to work from existing US home wiring? I need to replace our current under-counter fluorescents - we think their ballasts are shot, as the bulbs are burning out with costly frequency. Is there an over-the-counter component for electronic newbs that could supply the DC inverters?
Devil_Dog kerns6 years ago
BIG LOTS sells a kit that includes 3 connecting 12W florecent fixtures that plugs into counter wall socket. $23/set. Each fixture is 18" long. In my kitchen I connected 4 fixtures to one outlet and 2 fixtures to another. This was a better setup for me and my limited skills.
dustinbolton (author)  kerns6 years ago
If you don't want to mod a laptop supply or something, you can get 12V transformers for things like pond pumps, sprinkler timers, etc. Home Depot has some 12V supplies for these purposes but they cost more. However, they do support a much higher wattage than the laptop ones.
There are dozens of DIY undercabinet lighting kits available in North America. Everything from flourescent to led to powersucking halogen. They're easy to install and user friendly. Check out the orange box or other similar stores and you're sure to find something to suit your needs.
Spokehedz kerns6 years ago
You are asking questions in which there are no good answers, other than 'Consult an expert.' The transformer can be purchased for US power. However, you may want to just replace the ballasts as they are usually fairly easy to replace and are cheap.
srilyk kerns6 years ago
His bulbs came with inverters. My guess is most of them normally do, too.
Punkguyta6 years ago
Who puts plants (fake or not) beside their stove?? I would imagine it gets all gross and greasy.
People composing nice photographs to go with their articles do :-)
dustinbolton (author)  sideways6 years ago
They are clean too! :)
jhbeck466 years ago
Try to keep the tubes away from steam, like over the stove. Over time it can contaminate the high voltage connection and cause the tube to short and over heat.
sharpstick6 years ago
I'd like to try this. My FEIT brand mini fluorescent undercounter lights are dying like flies and very expensive to replace. Current price of these lights is $5.75 per pair. I found them on ebay for even less.
It looks like the inverter runs at 5 ma(rating on the website). So you should be able to run 660 sets on this power supply.
Or 40 watts / .06 watts = 667 inverters.
What am I misunderstanding here?
Thats how much current the inverter itself consumes, the bulbs consume more.
The CCTs appear to be rated at 3W each and the max output of the supply is 40W so, in theory he should be able to run up to 13 lamps (40w/3w=~13). Not sure though it CCTs pull more current powering up which could further limit the number of bulbs per power supply.
Where do you get 3 watts?
12 v x .005(5 ma) = 60 mw
In the intro under Costs & Power Usage he states that the CCTs use 3w per tube. Also, if you look closely at the picture of the power adapter (Step 1) it shows it's output as 12v x 3.33A or a max output of 40W.
That 5 mA at the inverter's voltage (ie. what the tube draws), not at the 12v input voltage. I can't find the link to the inverter for this post, but from this one:

Input 12V
Output 680V
Current 5 mA

So that's .005 A * 680V = ~3W. The current draw on the input side at 12V should be closer to 0.25A.

BTW, svc does charge shipping :( but has very cheap ccfl's. Dual 12" for $7, not nearly as cheap as the OP but still decent. I'll have to check out the link from this post though, sounds good.
Brilldea6 years ago
Nice stuff! I personally like the cool white look, but I think other people may prefer the warm white look. Keep up the excellent posting.
mrnik06 years ago
A nice simple project that anyone can build! Good idea! If you want to save power though, the switch should be on the power lead to the transformer rather than after it, because even though you switch the power off you will still be consuming power in the power supply transformer windings.
Eliriel6 years ago
wow this effect is really beautiful... man, what an awesome DIY project. thanks so much for sharing... i'm going to be moving into my first apartment soon and i would like to make the place feel really nice, i could see myself investing a bit of extra money to do something cool like this. :)
Very secksay. :D
Einarjon6 years ago
The adhesive on the velcro shouldn't be a problem. Just use the staple gun on the velcro part that goes on the wood, and it will stay there forever.
bstalz Einarjon6 years ago
Exactly! Whenever you want velcro to stick to wood, use the adhesive, but staple it as well (using a staple gun). Use a nail punch to set the staple if necessary to ensure maximal hook to latch surface area.
Ed.B6 years ago
Don't cold cathodes dim over time? What is the life expectancy, in hours, of these tubes? Just curious, I like the idea overall.
1-40 of 58Next »