Infinity Mirror Clock

Published

Introduction: Infinity Mirror Clock

About: Electronics DIY Club in wuxi China.

This is a handmade clock mainly for decoration.

There are several LED lights in the clock, when turned on, it is a beautiful decoration for bedroom. When turned off, it’s a small mirror. Of course, it’s a clock itself.

Step 1: ​Materials

Clock*1, LED Light Strip*1, Screwdriver*1, Semitransparent Mirror*1, Reflective Mirror*1, Glue*1, Acrylic Board*1, USB Cable*1

Step 2: Cut

1. Cut the two mirrors into round according to the size of the clock,

2. Cut the LED light strip into a length same as the perimeter of the round.

3. Solder the USB cable to the LED light strip

4. Make the readings and scales for the clock using acrylic board.

Step 3: Disassemble

Disassemble the clock using screwdriver.

Step 4: Stick

1. Stick the readings and scales onto the semitransparent Mirror.

2. Stick the LED light strip onto the inwall of the clock.

Step 5: Assemble

1. Drill a hole on the reflective mirror and fix it to the clock bearing.

2. Install the semitransparent Mirror as the outside of the clock.

Now, a infinity mirror clock has been made successfully. The running of the clock is powered by 2 AA batteries. The LED lights are powered by 5V USB.

Clocks Contest

This is an entry in the
Clocks Contest

Share

    Recommendations

    • Backpack Challenge

      Backpack Challenge
    • Stick It! Contest

      Stick It! Contest
    • BBQ Showdown Challenge

      BBQ Showdown Challenge

    8 Discussions