Print PDF
Favorite
Email
Step 13Prepare and attach spout.
Make a canvas spout that is one foot long and a little over twice as wide as the hole left in the inflatable canvas frame. Fold this piece of canvas in half so that it is only a little wider than the hole left in the inflatable frame. Sew the canvas sheet together, leaving about 1/4" of extra fabric.
Pull this sheet of fabric inside out, so that the stitching is on the inside. Pull the sheet flat and cut one inch into the fold and cut another inch into the seam.
Your spout should have two one-inch flaps on each end. Pin one flap to one side of the hole in the large canvas frame and sew it (see picture). Repeat the step with the other side. Reinforcing the stitching may or may not be necessary.
Pull this sheet of fabric inside out, so that the stitching is on the inside. Pull the sheet flat and cut one inch into the fold and cut another inch into the seam.
Your spout should have two one-inch flaps on each end. Pin one flap to one side of the hole in the large canvas frame and sew it (see picture). Repeat the step with the other side. Reinforcing the stitching may or may not be necessary.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
