Print PDF
Favorite
Email
Step 21Close the heart's frame!
Now is the time to seal the spout. Clean out the inside of the spout with rubbing alcohol. Inflate the heart as much as possible and apply a line of rubber cement as close to the seam as possible. Apply pressure and wait for it to dry. Repeat this step as close to the last glued line as possible until it is nice and air tight.
The next day when the rubber cement is dry then you should paint the spout closed with liquid latex so that it is definately air tight. Put in three or four coats.
The next day when the rubber cement is dry then you should paint the spout closed with liquid latex so that it is definately air tight. Put in three or four coats.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
